VW Forum - VZi, Europe's largest VW, community and sales - View Single Post - Sweep floor turbo build :D
View Single Post
Old 19-01-2019, 09:55 PM   #2
Wannabe Chat Slut
Rodeorayman's Avatar

Trading feedback: (1)
Join Date: Dec 2013
Location: East Sussex
Posts: 689

So far the list of parts I have are as follows:

Used autolinea case cut for 94mm barrels, full flow oiling.
(not a supercase so isn't shuffle pinned etc) has 1mmline bore std thrust.
Genuine vw 69mm crank used but never ground will need a polish up and measure.
8 dowel forged chromo flywheel (used)
Webcam 86b with cb cam followers all used but serviceable. (undecided on this at the mo but its here so may well use it)
Genuine VW 043 heads will need full rebuild and LOTS of port and chamber work, also will upgrade valves and springs etc but do plan to keep stock size valves at the mo.
Schadek 30mm oil pump plugged for full flow (used)
Scat power pulley.

I plan to source:
92mm forged pistons and some thick wall barrels.
Straight cut cam gears
8mm head studs
1.4:1 ratio rockers
Pushrods Steel (I have some used already cut to length however they may not work depending on the rest of my valvetrain)

Everything will be sourced good second hand where possible
69 Bay Deluxe [email protected]

Rodeorayman is offline   Reply With Quote