Originally Posted by Zebedee
I set it up as best i could using tape measure and it tracks nicely in a straight line so can't be too far off. Just the camber i wasn't sure of. It seems to be in spec though.
Old stuff scares them i suppose. The measurements aren't on their computer so they won't try.
I set mine up last time, using a spirit level a length of steel with holes drilled in it for two bolts to set up the camber. The bolts lined up with the rim edge top and bottom. I set it up with 1 degree negative camber at the front matched both sides. This is not stock but I wanted it like that for better front end grip during the rally. It worked well.