Help with laser cutting.
I need a bit of help with some laser cutting.
Have found a guy that can do a little job for me for £20, but he needs a ďfileĒ made - I just donít know anything about that shizzle.
Can anyone here make me a suitable file please, and if so how much would you charge.
Alternatively, could anyone here make a file and make the bit I need?
I need a piece of 2 or 3mm mild steel sheet, about 120mm x 60mm with Ď25Lí cut into it.
The numerals need to be 20mm high, 12mm wide and about 4mm thick. Spaced out with 7mm between them.
It is to make a simple press tool to emboss a piece of .8mm think MS sheet.
Originally Posted by User_Name
I bet Chuck Norris wears Mr Slug pyjamas to bed!