Well big hole now, no going back. Also trimmed the headlining so it is easier to work around. I would say at this stage it is quite handy to have a spare pair of hands to support the roof section to be removed and also to hold the headlining out of the way in case of sparks from the angle grinder. I forgot to say in the last sction that I removed 2 sections of sound deadning material. At this point as well I cut the 4th headling bar. Remember to use something strong like an angle grinder because they are tough buggers.
Disclaimer: For recreational purposes only, some assembly required. Any resemblance
to real persons,
living or dead is purely intentional and the site admins are not responsible
for direct, indirect,
incidental or consequential ridicule resulting from any defect or failure to
perform. No animals
were harmed in the creation of this forum. Colours may fade over time. No other
warranty expressed or implied.