My 64 beetle has the wrong catch for the T handle. I've bought a new one but it is not drilled. Could someone give me accurate measurements for the distance from the bottom of the flat edge of the catch to the metal strip that holds the rubber in place. The car has had a new rear apron so I...
I am not sure if anyone can help since the Gov website states the page is out of date...
Does anyone know what the import rules are now that we are out of the EU?
My Beetle is in Italy and Covid allowing I'd like to bring it over...
1967 Beetle door handles (round push button)
Actually, I've been informed that these are for a 1967 Standard model, (not 66), thanks to Andy H.
Matched pair of 1966 1967 Beetle Door handles, with the round push buttons, Part Number 111 837 205 C , (unusually both are locking, with the same...
Pair of pre-68 Beetle front footwell Heater vent slides, with one of the retaining strips, (which you have to transfer when fitting new heater channels). £ 8 for all 3 parts + postage.
PM me if interested.
4 Used original overriders for Beetle blade bumpers. Good chrome, a couple have scratches underneath. A few small rust spots inside, mounting threads are good.
£ 50 including Postage to UK Mainland.
PM me if interested.
Late fibreglass wings
in good condition, complete with headlights.
All fixing holes etc intact.
I’ll chuck in some fibreglass running boards as the fixing holes are broke on these. £60ono
Collection from Weston-super-mare
Genuine empi sprintstars, my favourite wheels!
4x130 4.5jx15” to suit old beetles, type 3’s and 4’s etc.
Do need a refurb, a bit of surface rust around the joins, tyres are slightly perished so wouldn’t advise using them on the road.
Complete with I believe to be genuine centre caps...
These are 3x late pop outs for 65 onwards I believe. There is 1xN/S and 2xO/S.
N/S does not have a catch. Only 1 of the hinges is good, and the rubbers need to be replaced.
All can be bought online for not much money, it’s the glass and frames that’s the important bit.
Very dusty in the...
Hi there, I believe I've fried my Regulator on my beetle.
I have a BOSCH 9190040099W 14V Regulator and I see no way of gaining access to it to investigate!?
Looks to have some hardened resin solution in the back with no way of getting to anything... see photos...
Up for sale is a pair of new Klassic fab Beetle heater Channels 62-67, I was going to use on my beetle resto but have since decided to do localized repairs rather than full replacement. They're as new and never fitted. I'd like £550 for the pair which is £250 less than the going rate...
I've just fitted some 5.5" alloys to my 1969 bug and the wheels stick out from the arches. I love the wheels and don't want to go down the narrowed beam route, so i'm looking into wider wings - as minimum as possible.
Does anyone have any photos of their bug with 40mm wide fronts and rears...
Used Early Beetle interior cab door handle - £10
Stamped part number VW 111 118 837 225 A
Chrome in good daily user condition, some light surface patina/marks that might polish up nicely if you were concerned by such things?
Either a single or twin port - not too fussed on that part.
Doesn't need to be complete as such, as wanting this as a spare rebuild/learn project for myself this winter...
No end float would be ideal, and not seized, or anything else that could cause problems down the line.
It will be a spare...
Having owned my 1968/69 Beetle for a year I have started to turn my attention to the suspension and need some help
The PO has lowered the front by about 4 inches and the rear by about 2. This gives the sloped stance which I quite like and not too extreme.
I am not very happy about the...
Many of you will have seen my bug 'Pedro' at shows or read about our travels. I drove him from the UK to Singapore back in 2009 and now I could have the opportunity to set off again.
We've been short-listed for a Motor Vision Award which would give us funding to ship Pedro to South America...
Pair of original VW 4J X 15 steels correct for a 1966/67 Bug (have the 3 bulges for the correct hubcaps). Need a resto - as you can see by the pics!
£50 for the pair or £30 each
Based in Rayleigh (SS6 7) Essex and happy for someone to collect or I can get them sent for around £20 - £30