Volkszone Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Aircooled Mechanical Tech
    Howdy doody folks, need a bit of advice please:D My oval is now on a 2 inch narrowed beem and is lowered and running stock spindles. Do i need to fit bump steer stops and if so are they a straight forward thing to fit? I know i will need to drill a 17 mm hole to fit the bush, but is it...
  2. Aircooled Mechanical Tech
    anybody know of some way or other of getting the track rods horizontal....? are there any type of adapters or ends adapted to go up instead of down?:confused: trying to better my bump steer:(
  3. Aircooled Mechanical Tech
    Okay, i might be really stoopid for asking this but............... When i go to refit my steering arms in the spindles, do you leave the steering box end as is or do i have to turn them upside down too:confused: cheers peeps Giggs
  4. Aircooled Mechanical Tech
    Hello people, The bottom of the fuel tank on my lowered 68 bug rubs the track rods etc. I have fitted some spacers around 1-2 inches tall and used some longer bolts to hold it in place. Im lowered using a Puma beam with stock height spindles. How is everyone else getting around this...
1-4 of 4 Results