Volkszone Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Aircooled Mechanical Tech
    Hi, i'm wondering if there is a way that I can correct the rear negative camber on my late Bay. It's only moderately lowered and I've seen many vans much lower without any camber at all.
  2. Readers Rides
    So ill try n keep this brief cos i dont have the largest attention span. I bought this from sandy who built it. Its a 1963 1200 with a 6 inch narrowed beam and down 2 and a half splines (i think) at the rear. It is very solid, he had a build thread when he put it together so you can track it...
  3. Aircooled Mechanical Tech
    i have issues with alignment and camber!! last time i had it done i had to supply the settings as the modern garage didnt know anything about the old bug does anyone have the settings that i need to work with or a procedure for setting up camber and wheel alignment!
  4. Aircooled Mechanical Tech
    Hi there - I fitted up the front beam on my 71 bus last year and was faffing about trying to get the camber to look right and now looking at it again i'm wondering if the camber nuts are sided??? I'm only asking as i've never been able to get them sitting right and the notches seem to point the...
  5. Aircooled Mechanical Tech
    Was having a play with the rear suspension on my swing axle beetle and trying to work out how low i wanted it... going down 2 outer splines wasn't quite enough, but going down 3 splines meant the spring plates were resting on the stops :eek: So now i suppose my only option would be to notch the...
  6. Chat/Discussion
    On back of this pic shamelessly borrowed (hope you didnt mind) Lets see em
  7. Aircooled Mechanical Tech
    hi all ive got a swing axle beetle and ive lowered it on the back and now got serious camber, id like the wheels back straight so have been told to irs the rear, some people have said easy enough some say big big job? so which 1 is it lol can any1 help out with how hard it is to do many thanks...
  8. Aircooled Mechanical Tech
    My bug is lowered two outer splines at the moment but want to go lower but when I turn it another notch it sit on the spring plate. If I notch the spring plate will that be enough to let me turn it another notch and still give some travel? Also can I use an angle grider to notch then as I...
  9. Chat/Discussion
    Some say its a fetish, Some say its big and clever, So come on people post some pics, The more camber the better! :incheek:
1-9 of 9 Results