Volkszone Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Items For Sale - AUTO
    I have a brand new in box CB2201 Type 4 Camshaft including cam bolts and lube, along with a matched set of 8 CB2200 lifters. I bought them from Pierside Parts in the US for my engine but ended up getting some headwork done and using a hotter Webcam camshaft and lifters so these are up for...
  2. Aircooled Mechanical Tech
    Hi does anybody no the differences between the 1300 and 1600 camshaft are they just lift differences or duration aswell? also does anybody know of the top of their heads the lift and duration for these? thanks
  3. JG54 Cal-Look/Performance/Racing Forum
    The time has come when I'm after a bit more from my Beetle. I'm looking mostly at bolt-ons however I may split the case and put in a new cam and/or lightened flywheel. Currently the engine is a 1500TP - and I'm not looking to increase this. There's a bloke down the road from me that I believe...
  4. Items Wanted - AUTO
    Hi, Any chance someones got a very good original Camshaft with lifters in "as new" condition? Apparently the new ones you buy are all cheap quality Chinese replicas. If not then i've been recommended to try a Web Cam 86 or Scat C20/C25 cam as i'm keeping the engine reasonably stock. Was a 1500...
  5. Aircooled Mechanical Tech
    Hi, I've bought myself a T25 with a dead engine. It's a 2.0l Aircooled CU unit with Hydraulic followers and a single Weber with electric fuel pump. I have stripped the engine and split the case and found the cam is pretty well worn as shown below! The cam bearings were also cream crackered...
  6. Aircooled Mechanical Tech
    I have one worn cam with a good drive gear and one decent cam with a damaged drive gear. Is it possible (or worth) grinding off the original rivets and remounting the 2 good parts back together? If so, would I need special bolts/rivets? TIA. :)
  7. Aircooled Mechanical Tech
    Hi I am hopping for some help choosing a cam? I am wanting a good power spread for street use and a high rmp max. I know that the engle 110 is good for low and mid but i want high revs. The C35 seams ideal it being good all round with good rev max, but im not going to have a huge displacement...
  8. Aircooled Mechanical Tech
    Hi I have a T2 i use it for commuting it gets stuck in traffic and does lots of hill work .I got to change the push rod tubes so may as well give it a spruse up whist its out Now i got 1641 B/P's twin 34 ict's standard Vac advance dizzy Can anyone recomend a good Camshaft ??
1-8 of 8 Results