Volkszone Forum banner

carb set up

  1. Aircooled Mechanical Tech
    I need to decide on what carb/s to use on my 1500 single port im putting together to run while I rebuild my 1641... I have a few options, I have a set of weber 34ict's that the 1641 is currently running with, so could use those if I can find single port manifolds for them Or I could steal the...
  2. Aircooled Mechanical Tech
    Bought a new carb and inlet manifolds as the HS30 was the wrong one for my 1600 engine, went to change the manifolds over today and they new ones didn't fit :( Heres the one I took off, notice the locating pin hole And heres the new to me one without any pin hole :( Can I pull the...
  3. Aircooled Mechanical Tech
    re building my carb but cant remember the position of the accelerator jet. moby had a great diagram of where it should spray, but I cant find it anywhere. Anyone got it or remember it ? Thanks all.
  4. Aircooled Mechanical Tech
    Just got my twin 40 DRLA Dells on my 1600TP. I've set them up exactly as per the Dellorto tech book. Running 28mm Chokes 40 Accelerator pump jets 180 Air correctors 115 Mains 60 Idles .1 Emulsion tubes. The engine starts and ticks over fine. BTW the carbs are balanced, it's had new plugs...
  5. JG54 Cal-Look/Performance/Racing Forum
    My Notch is running a 1776cc engine with a 110 cam, 1:1.25 rockers and mildly ported heads. I have a pair of Weber 40 IDF's to go on there. I want to get it set up on a local rolling road and the guy has told me to find out what the jets/emulsion tubes and anything else that needs changing...
Top