Hi there, I am looking to get a weber 34 ict kit for my 1641 bug engle w110 cam. a few things I was wondering, what exhaust would I need? 1600 but which one would fit as the 34 ict kit obviously doesn't use the same style intake, my worry is as they don't have heat riser pipes, what exhaust...
I have dual solex pict 34 carbs on a 1972 crossover with a 1700 engine.
i have had to strip down both of them to replace the needle valve and gaskets.
the engine now cuts out when cold on tickover and generally is not smooth at all.
anybody no of a way of setting them without a vacum/co...
When i jack the front of my van up after a while i smell petrol and one of the Solex PDSIT 34 carbs is flooding the engine and leaking with petrol!
Is this just a sticking float/float valve?
just thought i would get other opinions before i start stripping carbs.
Type 4 1700 engine...
I'm helping a friend rebuild his 34 Solex Pict 4 carb for a T25 1600 aircooled ct engine, I have done the simpler Weber ICT 34 before.
There is a Bakerlite spacer/gasket between the carb and the inlet manifold that is shot. Any idea where to get one from? I have tried Eurocarb (who are...
hi im after some 57 idle jets for my twin kadrons, not sure if any exist or if they just go up in increments of 5 -50, 55 etc, if anyone has any or knows anywhere I can get some, or maybe someone knows of an alternative make which fits, let me know cheers charlie
Is keeping a pair of twin 34 Dellorto carbs running and maintained in tip top condition, something best left to experienced 'experts' or could a complete layman learn how to do it? :mental:
Is there any recommended reading on the subject that might help, or is it just best left to pros?
1973 1300 wizard beetle, 1600cc unleaded conversion, 2 twin solex 40mm carbs, 4 tip Monza exhaust.
Right so I think the static timing is set properly, we emptied the little carb fuel filter bottle, filled it up with some fresh juice, then squirted some easy start in the carbs, fired her up, runs...
Weber Twin Choke Carb, Complete with Manifolds for Beetles etc.
Weber twin choke carb complete with manifold. For vw beetles, Karmann Ghias etc.
Was going to use it, but change of plans means its up for sale. Bought it from a Beetle restorer and from what I know its been overhauled......all...
I've just ordered a pair of Solex P40's for my 1641 buggy but i also want to run them with the vacuum advance dizzy i have in it with electronic ignition. i've been told that they don't have vacuum take off on the carbs so i need to drill and tap them for this. I was told to drill and tap the...
Does anyone know of somewhere that preps carbs for turbo use near southampton or dartford? or someone who sells kits to do it myself?
the carbs are kadrons and i want to be able to run over 10psi boost on occasion.
Bought these ages ago on here for a 1641 I was going to build. I ended up going down the 1776 / DRLA40 route so these have sat unused since then in a box in the garage. They're the H40/44EIS Carbs.
All complete including linkage, fuel hoses and t-piece. I was told they'd only...
Early 60's VW splitty doors x 2 left hand side - £200 for both
SOLEX C34TCIC/-13 G5 Progressive Carbs - Complete. Made in Italy - YOURS FOR...
A newbie to the camper scene.
Bought a t25 high top a month ago.
It started ok when I picked it for the 160 mile drive home. Started cutting out when I took my foot off the accelerator, figured it was just because it had not been driven since September but would be ok once it warmed up...
Hello i have a 1971 Beetle with a 1600cc stock engine,
at the moment the engine max mph is 70 pushing. 60's comfortable :)
Now i no with a bit of help the engine is capable of alot more and was wondering if any one had any advice on how to get a bit more out of it.
At the moment i was...