Search Results for ‘carburetor’

Hi all, if anyone has a carb linkage downrod they want to sell please let me know. It's the downrod that attaches from the cross bar down to the carb. 4.5 inches plus the two ball connectors at either end. Ta.

My mechanical fuelpump had broken down and put loads of rusty looking fuel in the carb float chambers as well as into the engine case, I'm on with changing the oil and ive fit an electric fuel pump I had which is to feed twin webber 34ict carbs. Unfortunately the Chinese jk versions but as long...

hi im after some 57 idle jets for my twin kadrons, not sure if any exist or if they just go up in increments of 5 -50, 55 etc, if anyone has any or knows anywhere I can get some, or maybe someone knows of an alternative make which fits, let me know cheers charlie

Im very tempted to purchase a 32/36 weber carb and have it on my 1500 engine, my mate said ill need new manifolds so it can be twin port, can i not have the carb and keep it as single port?

I am new to this forum and admittedly not mechanical. I am trying to learn as I am looking to drive from Afghanistan to Ireland (or as far as possible) with an old bug. The car is more or less original and apart from some cheezy photographs, unmolested. It needs some fixing up and it'll need...

Taken off my mk1 Golf 1.6GL. Everything is working as it should. I've changed all vacuum pipes and auto choke works without any issues. As it's off the car it could do with a thorough clean just in case. The video shows the carb working in my golf yesterday before removing. Looking for £50...

Can anyone tell me please how to set the idling speed on my carb, it seems to be running too fast. I have a dwell-tachometer arriving soon that iu bought on ebay for £5. The carb is an EMPI version of the solex 34PICT 3. Engine is twin port 1600 with stick dizzy and vac advance. I replaced the...

Hi guys, I have a twin choke DRLA on my 1641cc twin-port and have been advised to change over to twin carb's by my mechanic as he thinks it's a better setup. WHAT ARE YOUR VIEWS? Some say my carb is better suited to to a bigger motor. It's grunty as fook, but pulling off in 1st does feel...

CSP Linkage in shrinkwrap unopened for sale with instructions (see image 2). I have used the arms that attach to the carb (bottom right of second image) but most carbs already have them, one of mine was snapped and I used a matching pair. I kept the CB Bar on my engine. More info on the...

I've just replaced the throttle spindles on my Solex and as a result the idle is a bit buggered. I've tinkered a bit but don't know what i'm doing and i've put everything back as it was. The Haynes manual talks about CO levels and machines. Muir says leave it to an expert. The garage I take my...

I have a 69 1500 beetle, basically it was facing problems of misfiring, backfiring, lack of power, cutting out etc. So changed the usual ignition system new leads, plugs, points, rotor arm, distributer cap. And was running fine for a couple of weeks then its happening again misfiring etc. so...

being technically challenged on the subject :crazy:, I'm aware that adding a fuel injection system to an old dub is not a cheap option, but is it really a option worth consideration or saving up for, or are you better off in the long term with a decent set of twin carbs?