heads

Ok chaps, T1 1600 twinport heads, exhaust valve guide replacement. do able at home ? Or do they need a press, and entrusting to a VW Aircooled engine specialist, of any engineering workshop ? I remember seeing a stepped rod/tool for pushing them in & out, anyone know where to get one ? Would be...

I am after a pair of 041 or 044 heads. My preference is for a pair of 044's I will be having them machines to suit my Barrels and Pistons which are quite large at 95.5mm so I am open to what you have already. Please PM me with anything crack free and useable. I am based in St Albans...

As above, t25 washerbox 2.1 cylinder heads £80 for the pair (will have more parts as I start to strip the engine) Will be going to Volksworld if anyone wants to meet up...

I have two heads, both right hand side, for 1.8/2.0l engine. One was all cleaned up for an engine rebuild, valve seats ground etc, after 20 miles, false economy of not getting new valves, one bent! It's still stuck in the head, very fixable though. Other one was taken off a working engine, but...

Hi, Looking to beef-up my '64 1200 sp Ghia engine and looking for some decent 1300 twin port heads, preferably cleaned and rebuilt with new seats etc, but not essential. Can collect from many places. PM me if you have something that suits. Cheers

Hi. I hope some one can help. I have a 1300 twin port that I've just fitted 1600 barrels & pistons to but have noticed now that the heads won't fit back on to the barrels. Does this mean new heads or can I have them machined to fit? Regards Dave

Hi, Basically breaking a 1300 beetle engine i bought not long ago. I thought it was a good engine just needing a re-build, but it was missing a big end bearing on No.1 cylinder:mad:. so it needed more than i could really afford. I'm keeping the tinware, pump, dynamo, dizzy etc as I'm looking at...

IM LOOKING FOR A PAIR OF 1300 OR 1600 TWIN PORT HEADS, MUST BE IN GOOD CONDITION (NO CRACKS,WARPED) SO WHAT YOU GOT? CAN MEET AT DUBFREEZE TO COLLECT. CHEERS

hi, im about to order some barrels and pistons for my engine build and have heads that are machined for 1835 but have read alot about them being thin walled and i plan on this engine lasting me a while so want 1776 to be on the safe side for the sake of 59cc... basically all im asking, is the...

hi im currently bit by bit saving up and buying parts to build a 1835cc i have the heads which are 043 101 375R and have been cut to 92mm im about to buy a few more bits including 1.4 high ratio rockers but dont they put more strain on the heads? they already have dual valve springs but what...

Hi Does anyeon have a Long bonnet they no longer require, also looking for a suitable front valance to match.... and rear valance to take a semi-w decklid Also, building a 1641cc motor so looking for suitable heads, decent cam (engle 110 perhaps?), 1.25:1 rockers. Thanks Gav

Hi All - I have a set of CB 044 Magnum Performance Cylinder heads, cut for 94mm bore, with 40x35.5 stainless valves & single HD springs, HD retainers, 12mm long reach plugs, etc. They have done about 500 miles on a 1914cc motor & are in perfect condition - No cracks, not overheated - ready to...

Need a pair of ready to bolt on, performance heads for a 1914 engine, so bored for 94mm. Nothing too exotic budget wise, but must be in good order. What have you got? ta Barrie

Price drop - NOW SOLD posted. Just need 'em out of the way.... Selling a matched pair of complete cylinder heads purchased from Just Kampers (Part. No. J11380) last year. Fitted these to my engine along with some 1641 barrels and pistons last year as a quick fix to help it get up hills - 700...

Hi, can anybody identify the type of heads from the following part code please: 040 101 375 2 with a big 57 underneath marked vw/audi They are twin port from either a standard 1300 or 1600. Thanks!

Hi, I'm running a 2165cc with CB Perf 044 Magnum Heads 40x35.5mm. Want (need) to change the plugs as starts are really hard in this weather. Can someone tell me what is a good plug choice for these heads is and also what the plug gap should be.... happy Christmas :D

Hi chaps and chapettes, I'm looking for a pair of 1300 twin port heads, in good condition, ie no cracks or broken studs etc. An already ported / 3 angle valve cut would be most welcomed, but realise I probably asking for a bit too much there! Let me know what you have Dan

Does the spec and indeed valve size really matter all that much bearing in mind its the turbo thats stuffing the mixture in and inlet flow isnt such an important aspect ??

Garage Clear Out - lots of nice gear Garage Clear out of excess stuff . Lots of nice quality buggy/beetle stuff. All prices plus postage and package + £3 paypal sur charge cheque ok to be cleared in my account before posting. Pictures here some bits little oily...

I know its a simple question but................................ Just bought some new heads, do i need to lap the valves before bolting them on?