Volkszone Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 31 Results
  1. Items For Sale - AUTO
    SOLD Set of heater connection/adaptors for an original Monza aftermarket exhaust, (instead of messing about with extended ally hoses), these pods also add a bit more heat. Unused, just a few marks from lying around in my garage for a while. May fit other aftermarket exhausts and headers with...
  2. Aircooled Mechanical Tech
    Hi Dubbers Daft question but has anyone come up with an alternative to heat exchangers??? No I don't have a Beetle but I do have a beetle based kit car and in the rain when you cannot open the windows the heat exchangers are pretty useless....as far as I am aware the small electric heaters on...
  3. Aircooled Mechanical Tech
    I have a 69 Bay, with Westfalia interior (wardrobe down side). I am looking at installing an Eberspacher heater that I have, and whilst researching this I found someone online who had put one in his engine bay - see attached photo. It struck me as a very neat job! I am hoping to do something...
  4. Aircooled Mechanical Tech
    So, I've recently upgraded my engine from 1600CC to 1776cc with an engle 110 cam, stock crank and con rods, heavy duty oil pump, stock fan shroud. I have some questions now, 1. I've got some oil drip and I think it's from the engine pulley. Since all seals and bearings have been changed im...
  5. Aircooled Mechanical Tech
    Hi, I'm in the process of attempting to get my bug roadworthy again after discovering that the passenger side sill had pretty much fallen out. I'm trying to decide how best to repair the sill and heater channel. I think patching up the floor pan edge and welding a new bottom plate would be a...
  6. Items Wanted - AUTO
    Hi. Does anyone have a metal sliding footwell heat door for the drivers side (RHD) of a 60s bug? Or does anyone know where I can get hold of one. Thanks!
  7. Items For Sale - AUTO
    Another nice thing that's been lying around, which I doubt I'll ever get to fit! This is a Eberspacher B2 12v petrol heater that will fit early Bug's. It's in fully working order but is missing a couple of parts to able to fit it properly. These can be picked up easily or are easy to fabricate...
  8. Items For Sale - AUTO
    *Being sold as untested, not sure if all parts are present*. Bought this for my bug but haven't bothered to put it in. I don't know if it works or if all of the bits are there for it but I think £140 seems reasonable? I can post it for an extra £10 or collect from Stourport On Severn. Thank you :)
  9. Items For Sale - NON AUTO
    Amcor HD320H dehumidifier and heater for sale The front of the white caseing has yellowed from sunlight, but otherwise in good condition. If you have excessive moisture or problems with damp and require a Heavy Duty Dehumidifier without breaking the bank then the Amcor HD320H is the one for...
  10. Aircooled Mechanical Tech
    I have a propex heater that I bought off fleebay that fires up and blows hot for 15seconds and then cuts and the red lockout lights up. The model is an older HOT BOX one with the red green and amber lights and I have checked battery voltage out at 12.7v and a full bottle of butane. I will need...
  11. Aircooled Mechanical Tech
    Does anyone know of an idiots guide to replacing heat exchangers on a 1974 bay window camper (1600 twin port). What are the potential difficulties or any handy hints or tips? Is it easier to replace the rear box at the same time? Any help gratefully received. Thanks
  12. Items For Sale - NON AUTO
    Fully functional and in amazingly un-messed with condition with the ‘void if broken’ seal still intact! I spent ages finding one like this, as these heaters have a habit of being opened up and tinkered with over the years - this one has not been messed with! Still on the original wiring loom...
  13. Aircooled Mechanical Tech
    I'm going to try to restore the function of the stock heating system on my '79 bay. Currently the flaps on the heat exchangers have been wired to send heat to the front so the left heater lever does nothing. I'm not worried about that right now. What I would like to sort out is the right...
  14. Items For Sale - AUTO
  15. H20
    So the resistor pack on my mk2 polo has gone. and therefore the heater only works on number 3 (full) i dont suppose anybody knows where i can get one from really cheap as im not prepared to pay the crazy prices at gsf. thanks in advance. PS check this site for more details...
  16. Items For Sale - AUTO
    Hi, Bought this very tidy BN4 a while ago off here with the intention of fitting it to our split bus. Unfortunately it won't fit due to having twin carbs :( (I should have listened to those in the know :o and I don't really want to sacrifice the storage space under the R&R) I have never...
  17. Aircooled Mechanical Tech
    HI Everyone, I'm attempting to replace the heater cables on my 69 Bug tomorrow. I haven't yet looked in the Haynes, but thought I'd ask if anyone has some do's and don'ts before I find out the hard way! Thanks! Jay
  18. Items Wanted - AUTO
    Just bought my first van and it has come with a type 4 pancake engine. It's missing the Squirrel Caged Fan to blow air down the heating ducts, also missing a fan cover cage and some cowling. Any help gratefully appreciated.
  19. Items Wanted - AUTO
    Still in dire need of a replacement brass jet for my Eberspacher BN4. It's the one thing stopping me finishing the install :( Any help muchly appreciated! Rich
1-20 of 31 Results