Volkszone Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Items For Sale - AUTO
    Bit of a stab in the dark but is anyone up for swapping my EMPI ICT hex linkage setup for a centre pull bellcrank setup? :tick: May consider selling for the right price. Pic of my EMPI setup below
  2. Items Wanted - AUTO
    Hi, Looking for manifolds and linkage for dellorto 40 drla's.. Vw type 1 going into split, cheers.
  3. Items Wanted - AUTO
    Hi I'm looking for the linkage that control the opening and closing of the "cooling flaps" on a twin port doghouse for beetle. I use to run a single port so I've salvage the flaps (I think they are the same) I've got the thermostat and the rod but the linkage bar foul on oil cooler. Anyone got...
  4. Items Wanted - AUTO
    Hi Needed is a gear lever complete with the gear linkage rod that runs from the bottom of the gearstick to the gear box. For a Trike project based on t1 need something in good usable condition please. Please let me know the price with and without postage. I am in West Yorkshire Thanks in advance
  5. Watercooled Mechanical Tech
    Part of the linkage near the front of the van has an arm with what looks like a nylon ball at one end, and a standard metal ball at the other. The nylon ball should sit in a cushion of hard rubber or similar,and swivel/rotate freely, when the gears are changed. It kept popping out, so I'd only...
  6. Aircooled Mechanical Tech
    Installed dual carb set up on my Beetle over the weekend. But with all the linkage hooked up, there is some resistance that is not allowing it to spring back to where the idle screw rests back on the "idle plate" I guess you could call it. Basically, if I hit the throttle, it stays wide open...
  7. Items For Sale - AUTO
    Hi - these were fitted to an engine I bought recently - had to replace as the engine I'm building will use a Berg breather tower and you can't use one of these with one of those.... Think they're Bugpack but wouldn't bet on it... http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=110694129190
  8. Watercooled Mechanical Tech
    Hey folks, Driving home from a gig, all fine, go to shift into 5th, and it's not there, the gearstick suddenly feels reallllllly sloppy, and has tons of play in it, I pull over, and it won't select any gears bar 3rd & 4th, and it can't find reverse either. Any ideas? I was thinking linkage...
  9. Items For Sale - AUTO
    CSP Linkage in shrinkwrap unopened for sale with instructions (see image 2). I have used the arms that attach to the carb (bottom right of second image) but most carbs already have them, one of mine was snapped and I used a matching pair. I kept the CB Bar on my engine. More info on the...
1-9 of 9 Results