Volkszone Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Items Wanted - AUTO
    Hi all, if anyone has a carb linkage downrod they want to sell please let me know. It's the downrod that attaches from the cross bar down to the carb. 4.5 inches plus the two ball connectors at either end. Ta.
  2. Items Wanted - AUTO
    Hi all. I currently in the process of re-building a 1200cc engine out of a 67 bug and upon inspection have found out that one of the previous owners has removed the thermostat, linkage bar, flaps etc. I've bought a new thermostat, bracket and connecting rod but I can't seem to find anywhere...
  3. Aircooled Mechanical Tech
    New here, so apologies if this is not a new topic. I have a CJ type 4 engine, recently fitted with twin Weber 34ICT - I had a problem with burnt valves, so am still running in after a minor rebuild. The Weber ICT replaced the old set up of a single Weber mounted on those long inlet manifolds...
  4. Watercooled Mechanical Tech
    Hi, Currently got a couple of problems with the transmission in our 5 speed T25 (1990). We lost reverse for a couple of weeks, and the rest of the gears felt even more like stirring porridge than normal. We took it down to a mates and got it on a ramp to have a look. Seems like clutch and...
  5. Items For Sale - AUTO
    I've got a brand new set of CB Performance manifolds/ hex bar linkage and filter bases and tops to suit a set of Twin Dellorto Carbs for Type 1 engine They have only ever been trial fitted, and were imported by me from America at (vast) expense!!! (its a shame they didnt fit the GP body.....)...
  6. Items For Sale - AUTO
    Gene Berg manifold and linkage for Dellorto DRLAs / Webber IDFs (I think). All you need to bolt up and go. I bought these direct from Gene Berg last summer and not used them. These were bought for Dellorto 40s and you will need both parts to make it work. All parts new and have not been...
  7. Items For Sale - AUTO
    SOLD - Twin Weber 40 IDF bolt on with uprated Weber linkage Bought from Texas and imported into the UK a few years ago was reccently runnning on my buggy on a 1600 engine can give you the jets if your interested. Selling due to an engine rebuild that is going injected insted of carburated...
  8. Aircooled Mechanical Tech
    Are they any good? I think they look neater and my second hand hex linkage off here is shagged (thanks to whover I bought it off :rolleyes: was over a year ago but only just started to try and sort it out). Any to avoid or an out and out best? For 36 DRLAs Cheers :)
1-8 of 8 Results
Top