Hiya, as you can tell I'm selling my Bug. Bought back in January 2012, 'Leonard' was in this state...
We decided to do a body off resto which started soon after we bought him. This included new heater channels, front clip, rear cross members, door pillars, bulkhead repairs and inner wing repairs...
For Sale near Manchester:
1968 VW Beetle 1500 (has 1600TP engine) with early style wings/lights (pre 67)
Recently repainted BMW San Marino Blue with a matte clear coat at a cost of £3000.
Spec as follows:
Dub On Air air ride system.
4" narrowed and adjustable front beam with Bug People skid...
A pair of original #VW spring plates (notched by a previous owner) for sale - £50
For those that love getting down an dirty with their lowered or slammed Vintage VW bus, then these ex-Californian imported notched spring plates might be of interest… a bit grubby, but solid and rust...
Genuine OEM T4 Multivan 40mm drop springs SOLD
NOW SOLD thanks for looking
I am selling a set of Lowering springs from a German T4 150bhp Multivan.
- Genuine VW parts
- Fit UK Multivan, Caravelle, Transporter etc
- Minimal use as I changed them for 60mm's (regretably!)
- Drop is 30-40mm...
t’s with a heavy heart I’m selling my beloved mk2 golf!
It’s a mk2 driver 1.6, which I have been lovingly restoring/improving for the last 2 years.
It’s a 1.6, with weber carb and K&N air box. We replaced the cam belt and gear as well as all the spark plugs so it runs smoothly. The ignition...
I have a narrowed adjustable front beam I would like to swap. It has Albatross type adjusters and is narrowed by 4" with the flat end plates. The reason I want to swap is with the drop spindles I have it is too low for what I want(can barely get a shoe under it). I still want a lowered...
Clearing out my garage due to moving house. Here's some things I had forgotten about.
King and link 7" narrowed beam, needs adjusters and bushings to finish. Professionally welded end plates. £50
Beam end plates. Use these to build 5" beam and mount shocks to the inner wings. Laser cut 8mm...
Hi guys, this is my first post and first bug so sorry if this is obvious or in the wrong place or anything :incheek:
My beetle is a 1971 1300 and has been lowered too much for me, it has an adjustable front beam and shorter shocks, the previous owner said it's as high as it'll go on the shocks...
Vw Polo 6n 1.0 for sale. Owned this car for about 2 years now, been a great car. Cheap to run, cheap on fuel cheap to tax. Car is MOT'd until the end of April, tax ran out in November, only around £70 for 6 months, £130 for the year if I remember correctly. She has been off the road since...
Skidplate for VW Beetle/Ghia/Kubel.
FOR NEW AND OLD TYPE FRONT BEAMS
Protect your frame head/chassis/front beam with this skidplate!
Lasercut from 5mm S235, this will throw some sparks without f00king up your chassis.
Great on airride cars, see pics and movie below!
Mounted on lower two...
New price again.
£2750 as it is now
£2250 with a stock 1300TP engine
£1900 without any engine
Make me an offer
Hi, I'm selling my '71 1300!
Bought this car off here nearly a year ago.
It was lowered then but I put it back to a comfy ride height and used it for about...
Reluctantly I am going to have to sell my Late Bay Panel Van. He's been very reliable and is in very good condition and has happily taken me all over the country with no problems.
The van sits nicely low and now doesn't have any problems with speed bumps thanks to the new Creative...
Up for sale is my 2003 VW Bora 1.6, 16V.
Bought the car about 12 months ago but have had to buy a van for work and there isn't any room on the drive for this. The bora is lowered on Jom coilovers with genuine 17" Mercedes AMG alloy wheels, GLI rear lights and joey modded fronts. The tyres all...
I'm looking at replacing my front shocks with Monroe air shocks.
The reason for this is my bus is lowered and my drive is steep. I have to put wood blocks under the front wheels to get on or off the drive and its not practical.
Going off the literature from buying the bus I have a...
Hi, Im pretty new to forums and vw's. Im 16 years old and have a "72 beetle and im planning on dropping it 2 splines. Would extended and notched spring plates be needed to correct toe in and what size? Also if anyone knows where to get them from the uk would really be helpful.
I am in Totnes, Devon and want to get my bay lowered. One company reckons £700 which seems steep! Would love to use Type2 Detectives but Cambridge is miles away, but ther cost is good and they do a good job.
So anyone know anywhere local to me who can drop my van for the same cost...
1972 VW Beetle (Tax Exempt) - £3495 ono
Located in Torbay, Devon
Owned for 2 years - Selling to buy a boat
Extensive service history back to 1999 - all receipts kept during my ownership
MOT until March 2013
Almost a years tax although tax exempt
1641cc Engine - Holds oil and...