Search Results for ‘play’

I'm having trouble working out a good way of checking this. Anything decent suggests the use of a specially designed lever bar, but these don't seem to be available anywhere and look like a pain to make up. Everything else just seems to be based on the 'move the wheel up and down' philosophy...

:paypal: Here is my xpera play, its on ebay for £128, but i will sell it on here for you lot for £120 posted ;) here is the link with the pictures http://www.ebay.co.uk/itm/251188097292?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649 proffesionally refurbed with new circuit board. If you...

Just need some advice for a problem i have with my rhs front wheel, i noticed today while working on it, there is a small amount of play/wobble when i pull and push on the top of the wheel, the other side is fine with no play at all. It's obviously a hub related problem, as all the balljoints...

I am searching for a new LHD steering box for my usa import 66 split-screen. Any ideas. I have only found one on samba but american based and they will not post to UK. It's a shame as it was 99euros as opposed to 400 euros i have seen. There is a knocking noise coming from in side the box when...

Hi all, My dad's '62 bug has recently been to a local vw "specialist" (i won't name and shame) and had a slight lowering job, where the front beam was fitted with sway-away adjusters and the rear lowered. the car looks great but had an un-nerving knocking noise when steering hard in any...

Photo Challenge #93 - Play. Play time, play games, play away, play dead, play nice, play nasty, play for time. There are so many ways you could interpret this theme, so interpret as you wish. :hangloose Rules: * One entry per person, if you wish to change your entry please edit your...

Photo Challenge #93 - Play. Play time, play games, play away, play dead, play nice, play nasty, play for time. There are so many ways you could interpret this theme, so interpret as you wish. :hangloose Rules: * One entry per person, if you wish to change your entry please edit your...

Whilst under the van adjusting the brakes tonight, I noticed that the output shaft flanges conm,ing out of the gearbox have play in them i.e. I can move them up & down if I put a screw driver behind them. The off side one isn't too bad, but there is 2 or 3mm movement in the near side one. I...

I've just removed what I believe to be the original 6v starter motor from my bug (now has a 12v conversion) as the solenoid kept sticking "On" - after a bit of cleaning, greasing and wiggling it now appears to work fine (I tested it using a fully charged battery out of the car) but it seems to...