Volkszone Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Aircooled Mechanical Tech
    Hi all, hoping someone can help. Yesterday I fitted a new mechanical fuel pump (100mm push rod version) on my 1600 tp. Added two gaskets on top of the plastic flange. Rod sticks up about 1mm at lowest and 5mm at highest which from what I’ve read seems ok. Connected up a pressure tester (albeit...
  2. Aircooled Mechanical Tech
    Hi Guys, Todat i changed the oil in my VW T2 1700 Type 4 engine, I drained the oil, cleaned the oil strainer, replaced the oil strainer gasgets, replaced the sump plug washer, replaced the oil filter. After topping up the oil to midway between the markers on the dipstick, i let it settle for a...
  3. Aircooled Mechanical Tech
    Hey all, I have bought a 67mm glass bowl filter king to go on my bus. Does anyone know what fuel pressure it is set at from the factory? The leaflet with it tells you how to raise and lower the pressure regulator, but not what the factory setting is. If the answer is "whatever the bloke at the...
  4. Watercooled Mechanical Tech
    Hey, my water cooled 1.6 TD engine has a split pipe taking fuel from the pump to the injector. Does anyone know where I can get a replacement from? Thanks... MAtt
  5. Aircooled Mechanical Tech
    I've got a 1983/4 T25 2litre with twin 34PDSIT carbs, new fuel tank and lines, including a breather pipe on the tank but the T piece between the carbs keeps leaking as if there is to much pressure has anyone got any ideas? It isn't even consistent, it tends to do it when I first start it after...
  6. Aircooled Mechanical Tech
    Hello below is a photo of the senders installed in the bug i recently bought In the dash I have oil pressure & temp Am I correct in thinking the twin sender is for gauge pressure & oil pressure light on the dash like this at M7 http://www.machine7.com/product.php?xProd=3265&xSec=1169 and if so...
  7. Aircooled Mechanical Tech
    Can anybody tell me where the oil pressure switch is located?:confused: My ride is a 1969 1300 Bug. I have the lead but it was tied up out of the way. I have test it and the dash buld comes on if you earth the lead but where should it connect to as I can see no obvioius connection anywhere...
1-7 of 7 Results
Top