Search Results for ‘scat’

Looking for quality shifter for my RHD ‘74 Beetle, either VGC or NOS, willing to package and post/courier. UK only. What’s available?

Had a late delivery yesterday so a few more goodies for sale CB Performance 82mm Crank, VW Journal £300 posted CB Performance 76mm Crank, VW Journal £195 posted CB Performance Gland Nuts £22 posted Scat Lube a Lobe lifters £70 posted Berg Fan £110 posted Daiken Super Disks £60 posted...

Re: T1 Performance parts wanted Hi, I'm looking for some Type 1 Engine Performance parts as follows: 1) CB 044/Scat/Bugpack Heads - Anything considered but must be cut for 90.5mm B&P's - dual valve springs required and some porting done is good, but not essential!!! 2) Berg pressure relief Oil...

Got a tax bill to pay so need to clear out my stocks a bit;) Big list so I'll add through the day and put pics up as soon as I can:D All new and boxed Jaycee billet dizzy clamps with timing markers Blue x2 Red x1 £30 each posted Jaycee fuel pump blockoffs without breather Red x3 Black x3...

A SCAT gear shifter taken from my own bus. It will fit 59-67 Split Screen bus. The shifter is in good condition, I just wanted a taller one. The Chrome is in good condition, as is the plastic T handle and the boot has no tears or rips. New, they cost £110. £50 Based near the...

I am doing virtual mock up for some custom parts, and i would like to find these Scat H-beam chevy journal dimensions :) In my pic they are: 33mm and 80mm

New order now in so thought id update, Kennedy Stage 1 Clutch £110 posted £105 posted Kennedy Stage 2 Clutch £110 posted £105 posted £139.58 at coolair...

Hi all, I am a newbie. Have rebuilt Golf engine, etc but new to air cooled rebuild. Looking at building a 1776cc engine using complete SCAT kit plus new heads. Only part re used will be the crank case. I know the case will need machine work to allow the cylinders to fit but what other work will...

Weber 40 DCN 14 Carburetor on origina 60's Scat Enterprise manifolds!!! originally fitted to Ferrari, Fiat and Lamborghini's back in the day. I found these fitted to an old beach buggy and planned to give em a referb and put them on my 72 bus. I'm selling the bus and the carbs have to go too. If...

Pedrinis - SOLD Scat Shifter - SOLD I have for sale two 040 cylinder heads cut for use with 90.5mm pistons and Weber IDF manifolds. These are in good condition and run well, I have taken them off as I have replaced them with larger CB items. £250 for both heads and IDF manifolds Also for sale...

It's been in storage for a while now not sure how long to be exact there's hardly any rust (odd bit of surface rust), shell is perfect apart from the front end where the nose has been hit in slightly but could easily be hammered out the floor pans are good with the only visible part of corrosion...

It's taken me a while to come to this conclusion but i've finally decided to sell off some of the bits I started collecting to build my big engine. Time and other priorities mean I will probably never get to build this now. So for sale I have the following items for now: Scat 84mm Volksracer...

SCAT SERPENTINE PULLEY KITS IN SILVER OR BLACK - FROM JUST KAMPERS We realise that these products aren't going to be wanted by every single VZi user, but every penny saved in these times is a bonus - and we are sure that these discounts have helped at least some VZi'ers save some pennies as...

wanted, better gear shifter for me bus, has a shagged scat one at the moment which keeps breaking, anything will do as long as its not a stick in a bucket!! wyg g

So i have a empi hurst shifter in our 72 bay :) Have done for 3 yrs, What is the difference then........... Looking at upgrading/changing to the scat t-bar shifter, the cost difference £40........but is it worth it ? Any comments, advice welcome :) Many thanks

Hi All, This is my first post so please forgive any wrong doings ;). I am thinking of changing the gear shift in my 1972 Bay Camper, I have been looking at the EMPI Trigger Shift or Scat Dragfast Shifter. Does anyone have any experience of either of these or know any pro's or cons with each...

Hi, I have fitted twin scat solex p40 carbs to my 1300 beetle. I have changed the main jets from 140 to 115, but it still seems to be over fueling. (Exhaust is popping a bit, a some black smoke). Can anyone advise me if I need to get smaller jets, or is there something else I should be...

Cut - slice - Here it is - feel the quality ! (note - This is a Scat 36hp style doghouse fanshroud. I modded it a few years ago by drilling holes to fit the flaps - these repro fanshrouds don't normally have them) Compared to a stock VW one - More fanshroud info here -...