Volkszone Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. Items For Sale - AUTO
    Was going to use on a car but have changed approaches to how I want it to look so have no need for this shifter. Never used. RHD locking for a sedan. £450 ono
  2. Items For Sale - AUTO
    This was taken off my friends 72' Beetle. I have sympathetically restored it - cleaned off the gunk from over the years, polished the chrome and waxed the wood to bring out its nice patina. Badge is complete and not cracked as I know a few are. A couple of tiny splits in the boot but nothing...
  3. Items For Sale - AUTO
    A SCAT gear shifter taken from my own bus. It will fit 59-67 Split Screen bus. The shifter is in good condition, I just wanted a taller one. The Chrome is in good condition, as is the plastic T handle and the boot has no tears or rips. New, they cost £110. £50 Based near the...
  4. Aircooled Mechanical Tech
    Just put my fancy new Hurst shifter knob on, and as you can see, it sort of needs to stay facing in the same direction unlike a ball type knob. How do I stop the shifter shaft from rotating? Should I even be able to twist it in the first place?
  5. Aircooled Mechanical Tech
    I think i read on here somewhere that the empi quick shift plates are stackable? one person claimed to have seen 4 or 5 used on a volksrod! can anyone confirm/disprove this? would it shorten the throw any more than just a single one?
  6. Items For Sale - AUTO
    Empi Hurst style shifter. Looks like new, it was only in my car for a few weeks, as i've now just bought an original GT beetle shifter, which is something i have always wanted for my bug:). Nice to use, reduces throw by 60%. Easy to fit, select neutral, remove old shifter, bolt on new shifter...
  7. Items Wanted - AUTO
    As the title says I'm looking for a Hurst Copper shifter, preferably the curved version but I'm willing to consider the straight version as long as its the right condition / price. Don't worry if yours needs a bit of tidying up, rat look works for me. PM me folks, I've got cash waiting. Tin
  8. Items For Sale - AUTO
    Pedrinis - SOLD Scat Shifter - SOLD I have for sale two 040 cylinder heads cut for use with 90.5mm pistons and Weber IDF manifolds. These are in good condition and run well, I have taken them off as I have replaced them with larger CB items. £250 for both heads and IDF manifolds Also for sale...
  9. Items For Sale - AUTO
    EMPI T2 trigger shifter, nice vintage/patina/rat chrome - £50 A set of 4 Stainless Steel 14" wheel trim/beauty rings - SOLD! A pair of T2 Stainless Steel cab window vent shades (1968-79) - SOLD! T2 nose mounting spare wheel bracket (1968-79) - £10 Full spare wheel cover (beige) - £15 Early...
  10. Items For Sale - AUTO
    Few bit's surplus to my project's requirements, welcome to collect from Warrington Cheshire: Will take cash or Paypal :) Firstly a Pair of rear crossmember sections- SOLD I have an offside and NS inner wing repair section SOLD A pair of short shocks Bug pack I think, only fitted to mock up...
  11. Items Wanted - AUTO
    wanted, better gear shifter for me bus, has a shagged scat one at the moment which keeps breaking, anything will do as long as its not a stick in a bucket!! wyg g
  12. Aircooled Mechanical Tech
    So i have a empi hurst shifter in our 72 bay :) Have done for 3 yrs, What is the difference then........... Looking at upgrading/changing to the scat t-bar shifter, the cost difference £40........but is it worth it ? Any comments, advice welcome :) Many thanks
  13. Chat/Discussion
    just put my quick shifter into my 67' all the gears are absolouteley lovey but.....i cant find reverse..i know where it is....(pull up the lever thing and left and down) but it just wont work....keeps going into fourth...any ideas why?
1-13 of 13 Results