hi for sale I have a 1300tp turnkey engine... really good engine I bought it back in august but have decided to go bigger now.. not sure on mileage but the guy I bought it off had just rebuilt it before I bought it.. now end float no leaks, new clutch. just bolt in and away you go.. will try and...
help / Hi,
My engine is in the machine shop and i need a replacement as I have a 4 week wait for some parts to be shipped!! Not only that but im going to RTTS at the end of the month.
Interested in any T1 engine which can get me to newquay and back. I have all ancillaries off my 1500 sp which i...
Putting the add out in advance
As of mid-late January IL be after a replacement engine for my bug,
To replace the burnt out leaking oil everywhere 1200 iv got at the minute.
Turnkey (or near enough)
1600 or 1300 twinport preferable but anything considered,
Something that won't leave puddles of...
**** SOLD ****
Spec as follows..
- Later AS41 case with the larger oil gallies and threaded mount points so suitable for a bay as well as split or bug.
- Heads have bigger valves (39mm Inlet 32mm Exhaust)
- 90.5 Mahle pistons and barrels
- total seal piston rings
- 110 Cam
- double thrust cam...
We have been told that our Bay's engine only has a few months to live. We were planning on upgrading, but not this soon!
If anyone is selling a 1641cc Turnkey (or nearly Turnkey) we would be VERY interested!
2276cc Turnkey Engine - £4500
2276cc Turnkey Engine - £4500 - SOLD
Mark Wolter built 2276cc
Built for fast daily runner
Full flow AS-41 stroker case
MSD 6AL ignition kit
1 1/2 qt deep sump
External oil cooler with thermo fan
Fram HP1 spin on filter
Match ported 40x35.5 heads
Scat solid shafts...
FOR SALE AS ABOVE
YOU WANT POWER HERE IT IS!!
82MM COUNTERWEIGHT CRANK
90.5MM FORGED PISTONS/BARRELLS
TC-3 TURBO CAMSHAFT
044 CB HEADS
1.4:4 RATIO ROCKERS
FULL FLOW OIL SYSTEM
LIGHTENED AND BALANCED FLYWHEEL
BOTTOM END BALANCED
DUEL RACE SPRINGS...
ONE FOR THE OLD SCHOOL PERVERTS!
WITH MUCH REGRET MY BELOVED ENGINE IS UP FOR GRABS
JUST BEEN COMPLETLEY REBUILT USING ALL QUALITY PARTS.
COMPLETE TURNKEY TYPE 1 ENGINE FOR SALE.
CLEANED AND POLISHED CASE.
ENGLE 110 CAM.
NEW CAM FOLLOWERS.
NEW BEARINGS THROUGHOUT.
FORGED 1641cc BARRELS...
PRICE NOW DROPPED TO £1200 FOR A QUICK SALE
For sale as above...
Newly built 1835cc type 1 lump.
Counterweighted Crank 69mm
Engle FK87 Cam
Lightened 8 Dowelled Flywheel
1.25:1 Bolt-Up Ratio Rockers
040 Heads Light Port and Polish Job
Tapped For Full Flow
Please take out a banner ad before trading on VZi. You are a full-time engine building company.
As per the box up top ^
If not we get complaints from those who DO put in the pot.
Now on eBay (had to relist):
Due to fake buyer - and lots of hassle its up for sale again.
The engine is now in Hungary, Budapest - I can organize very cheap transport to the UK if needed round £200.
Only removed due to that fact that im fitting a 2.8 v6 turbo.
Runs well uses no oil, no water. Pulled really well. Clutch good. Head gaskets good, no leaks. Comes with all ancileries including air filter box. All you will need from your old engine is the rear hanger as i need this one for the...