Volkszone Forum banner

caliper rebuild

516 Views 2 Replies 2 Participants Last post by  lammyrider
trying to rebuild some bay calipers,can i get away without splitting them as the nuts dont seem to wanna move in a hurry,and whats the best way to paint them,caliper paint or powder coating (obv only if split ;) ) cheers
1 - 3 of 3 Posts
When you say rebuild ?

It would be so much better and easier to split them.
put the calipers in a vice, get a 6-point socket 1/2 inch drive and crack thoses fuckers off.
i split my calipers to rebuild them.
i'll take em to the garage round the corner sweet talk them into it ;)
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.