Volkszone Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
333 Posts
Discussion Starter · #1 ·
I'm replacing the lifter chanel on my windows 69 1300 passenger side window. The old rusty one just fell off.

I've got the bentley manual and it suggested 80mm from the straight point of the window. This was no way near window wound't wind. I've guessed what looked about right but the window is a little stiff on the way up.(May be the new felts)

Has any one got and dimensions of where the channel should be placed on the window. Once its on its a bugger to get off again.
Any help appreciated.
 
1 - 1 of 1 Posts
Top