Large collection of performance engine parts for sale. Almost enough to build a 2007cc engine.
Prices and condition of each item is listed below. Prices do not include postage. I am based in East Grinstead, West Sussex.
Photos are available here: Engine Parts for Sale
Please message me directly if you're interested in anything. First come first served basis. These are advertised elsewhere.
Prices and condition of each item is listed below. Prices do not include postage. I am based in East Grinstead, West Sussex.
Photos are available here: Engine Parts for Sale
Please message me directly if you're interested in anything. First come first served basis. These are advertised elsewhere.
| Item | Condition | Price | |
| Type 1/3 AS41 'super case'. Clearanced for 82x90.5, galleys drilled & tapped with unions (by Stateside Tuning) | Unused, was part assembled. Missing 1 case saver | Sold | |
| Street Eliminator Cylinder Heads. 40x35.5 valves. 98mm bore. 50cc capacity. Probably Bugpack | Unused. No packaging | Sold | |
| Scat Thin head light weight cam lifter | Unused in original packaging | Sold | |
| Bugpack 1.4 ratio rocker arms | Unused in original packaging | Sold | |
| CB Performance crankshaft, counter-weight, 78mm stroke, forged | Unused in original packaging | £300 | |
| Mahle 90.5mm x 82mm barrels & pistons, forged (98-1991-B) | Unused in original packaging | Sold | |
| Engle Turbocam TC10 284/276DX. 430/. 420L (p/n ;21-4210) | Unused in original packaging | Sold | |
| Engle Camshaft W100 420L/276D (p/n 21-4100-0) | Good used. Has original packaging | Sold | |
| Engle Camshaft FK89 | Unused in original packaging | £120 | |
| Engle Camshaft FK8 | Unused in original packaging | Sold | |
| CB Performance Super Race Rods H Beam 5400, VW Journal | Unused in original packaging | Sold | |
| CB Performance Super Race Rods H Beam 5500, VW Journal | Unused, small traces of rust from storage (none on bearing and gudgeon pin contact surfaces) | Sold | |
| Weber (?) fuel injection IDF pattern throttle bodies 99030.520 | Unused in original packaging | Sold | |
| Short IDF inlet manifolds | Unused, no packaging | Sold | |
| Empi Aluminium Push Rod Tubes (00-4109-0) | Unused in original packaging | Sold | |
| Bugpack Hi Performance push rods (one end uncut) 4084 | Unused in packaing but missing two ends | Sold | |
| EMPI 8mm C/M Case Studs Stock Length (00-4020-0) | Unused in original packaging | Sold | |
| Lightened flywheel | Unused, light rust from storage. Needs light cleaning up | Sold | |
| Lightened flywheel | Unused, some rust from storage. Needs cleaning up | Sold | |
| Bugpack hardened Lash Caps (4029) | Unused in original packaging | Sold | |
| Bugpack Teflon wrist pin buttons 90.5 (4594-12) | Unused in original packaging | Sold | |
| Empi Chromoly Gland Nut (00-4026-0) | Unused in original packaging | Sold | |
| Aluminium rocker covers | Good used | Sold | |
| Sump extension | Unused, no packaging | Sold | |
| Straight cut cam gear | Unused, small traces of rust from storage | Sold | |
| Gene Berg full flow oil pump cover | Used, some wear on the surface | Sold | |
| Scat 180mm Lightweight 4-Puck Clutch Plate (60045) | Unused, no packaging | £30 | |
| 8mm case studs (unknown brand) | Unused, no packaging, some rust from storage | £10 | |
| Empi rear support kit (00-9543-0) | New in packaging but missing top strap | Sold | |
| Hi-flow 30mm x 8mm Aluminium Oil Pump | Unused in original packaging | Sold | |
| Unused in original packaging | Sold |
