Volkszone Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
458 Posts
Discussion Starter · #1 ·
Taking apart the passenger spindle and didnt have to remove any circlips or anything from the grease cap.

I cant figure out what has happened to the end of my speedo cable.. The cable with casing is stuck in the back of the spindle but there is nothing on the other end, the cable is jammed solid and wont come out..

Advise please

Thanks
Mike.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top