Volkszone Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
Hi everyone im a newbie on here so please accept my appologies if im not even in the right area for this post.
Right here goes im looking for a wiring diagram for wiring up a mk2 golf gti 8v digifant engine out of a 92 car into my 86 caravelle, the engine is in using all diesel parts and i have the complete engine harness with ecu etc but that's where it stops for me.
Can anyone shed some light on this please.
 

·
Registered
Joined
·
9,657 Posts
Best thing you can do is get a haynes manual for starters as it will indicate what cables are what.

Then if I was starting from scratch I would plug the loom into the engine and trace out any wires that are not connected to anything and see if they go back to the ECU.

with Digifant I am pretty sure its like 1 positive wire and a couple for the engine.

I did find this online if it helps:



at some stage I need to decode one of these looms too, just at present I am working through a modern 1.4tdi one for my bus!
 
1 - 8 of 8 Posts
Top