Volkszone Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
712 Posts
Discussion Starter · #1 ·
Hi
These ain't my actual carbs (my twin Weber 40 IDF's already on motor), but posted pics for reference.
Where are the mixture/tuning screws? I've marked in top pic where I thought screws were on base, but mine got sealed holes as in pic, is this right?
Or possible my carbs a different model then normal and it's the screws halfway up base in bottom pic?

Any help appreicated

Nesty



 

·
Registered
Joined
·
712 Posts
Discussion Starter · #3 ·
Cheers Paul

Somehow, gonna be bugger to tune these. I might have to cut out some inspection panels.

Nesty
 

·
Registered
Joined
·
712 Posts
Discussion Starter · #5 ·
Hi Paul

Difficult to get a photo of them, as they are on the car now. The photo just a reference.

Too be truthful they don't sound that far out from one another. Tho Beetle still idles at about 1000/1200rpm which is annoying. I've backed of the idle stops as far as I can. Just thought maybe were sucking in too much air? Hence going to have a go at adjusting the screws.

Nesty
 
1 - 5 of 5 Posts
Top