thanks dude, seems like that should be enough to get you out of the shit in most situations :hanglooseMr_Wobble said:Spanners...
8, 10, 13, 17. May want to consider an extra 10 & 13mm. If you have the space, add a 12, 14, 15 and 19. Make sure they're combination spanners (open end at one end, ring at the other).
Medium to large adjustable spanner (with jaws big enough for the crank shaft pulley nut).
Same for sockets and ratchet. Plus a 4 inch extension bar, and spark plug socket.
Screwdrivers - Philips, Posidrive, medium flat blade, short stubby flat blade. May want to consider a multi-tip ratchet screwdriver too (if you have the space).
Medium sized hammer.
Locking pliers (mole grips).
Something that's .4mm approx - for setting points gap.
Extending handle wheel brace.
Duct tape (if you have the space for a roll - but you can buy small rolls).
Couple of rags.
As for spare parts...
A small selection of nuts, bolts, washers, and screws.
haha!! :smurf:shaggy the bay said:you also need a spade,black bin liner and your mother inlaw ...oh and a baseball bat ,take her with you ,when you brake down down some quiet lane and she starts to nag why you should have bought that shopping cart ford then you realise what they are for !