Volkszone Forum banner

Windscreen switch/motor problem

1 reading
531 views 6 replies 2 participants last post by  sw1zz  
#1 ·
Help! My windscreen wipers stopped working a simple fuse problem I think. Not the case fuse ok.
I've now Checked the wiring and see wires have burn't out. Now the problem begins. Looking at the switch it has 6 connectors numbered 31,53a,31b,53,53b,30. The haynes manual shows several wiring diagrams the only one I can understand is the usa model one but this shows 5 connectors ont the motor. My motor only has 4 connectors.
QUESTION:- Is the motor a switch correct if they are what wire's go where
 
#3 ·
The car is 1974 but not original. Your diagram looks completly different to the position of the wires removed however all the colours match. I suspect it's always been wired wrong. I did re-wire it and left 53b Open as no bk/yw wire.
I'm just waiting for a new swith then i'll re-wire it to your diagram.

THANKS
 
#5 ·
The beetle started life as a 1200beetle in 1974. It's been changed from 6volts to 12volts at some time and the engine has been replaced with a 1600 mexico engine. The motor is a squarish silver box. Don't really know what info to give you